MATERIAL SAFETY DATA SHEET
Discontinued:
Date of Preparation: 01/13/2009
Page 1of 7
SECTION I - Product and Company Description

Product Name: Heavy Duty Oil (90/140)
Product Use: Lubricant
Product Number: 12-700127-000


Company: Brunswick
525 W. Laketon
Muskegon, MI 49443

Telephone #: 1/616/725-4972
Emergency #: 1/800/255-3924
CHEMTEL #: 1/800/255-3924
International CHEMTEL #: 1/813/248-0585

SECTION II - Composition/Information on Ingredients
HAZARDOUS
INGREDIENT
MATERIAL DESCRIPTION
REF#		CAS#ECN#SARA
313
Y/N
% Wt.
NONHAZARDOUS
INGREDIENT
MATERIAL DESCRIPTION
REF#		CAS#ECN#SARA
313
Y/N
% Wt.
Solvent refined heavy paraffinic oil
Solvent refined resiual oil (petroleum)
Hydrotreated heavy napthenic oil
Polyisobutylene polymer
Industrial gear oil additive
Colloidal MoS2 (molybdenum disulfide)		64742-54-7
Pr64742-01-4
54742-52-5
9003-27-4
AM#420310
1317-33-5		N 37.0
N 40.0
N 20.0
N 1.0
N 1.0
N 1.0

This product contains no reported carcinogens or suspected carcinogens.
SECTION III - Hazards Identification


12-700127-000

Heavy Duty Oil (90/140)
MATERIAL SAFETY DATA SHEET
Page 2 of 7
SECTION IV - First Aid Measures

EYE CONTACT: Flush with lukewarm water for 15 minutes. Contact physician.
SKIN CONTACT: Do not remove with solvent. Use waterless hand cleaner followed by soap and water. Remove and clean contaminated clothing.
INHALATION: Remove exposed individual to fresh air. Restore breathing, if necessary. Get medical attention.
INGESTION: Rinse mouth. Call a physician or Poison Control Center immediately. DO NOT induce vomiting unless advised by a physician.
SECTION V - Fire-Fighting Measures

EXTINGUISHING MEDIA: Use CO2, Dry Chemical, Foam, Water Fog. Mists or sprays may ignite at temperatures below the indicated flash point. keep ignition sources, open flames, etc. away from these fumes.
Proper repiratory equipment to protect against hazardous effects of combustion products is recommended. Water in a straight hose may cause fire to spread and should be used as cooling medium only.
SPECIAL RISKS: Vapors heavier than air. Development of hazardous combustion gases or vapors possible in the event of fire.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE FIGHTING: Fire Fighters should use self-contained breathing apparatus with face piece.
OTHER INFORMATION: Keep away from sources of ignition. Prevent fire-fighting water from entering surface water or groundwater. Cool Container with spray water from a safe distance. Never use welding or cutting torch on or near container (even empty) because product may ignite explosively.
SECTION VI - Accidental Release Measures

PERSON RELATED PRECAUTIONARY MEASURES: Avoid substance contact. Do not inhale vapors. Ensure fresh air supply in enclosed areas.
ENVIRONMENTAL PROTECTION MEASSURES: Do not allow to enter sewage system, surface or groundwater.
PROCEDURES FOR CLEANING/ABSOPRTION: Use inert absorbent material to take up spilled material. Place in appropriate container until proper disposal method is determined.
SECTION VII - Handling And Storage

NOTES FOR PREVENTION OF FIRE AND EXPLOSION: Keep away from sources of ignition. Use and store this product with adequate ventilation.
NOTES FOR SAFE HANDLING: Avoid generation of vapors. Do not inhale vapors.
STORAGE: Store in well-ventilated area between 40 F (4C) and 100 F (38C). Store away from heat and sources of ignition.
Brunswick takes no responsibility for determining what measures are required for personal protection in any specific application. The general information given should be used with discretion.


12-700127-000

Heavy Duty Oil (90/140)
MATERIAL SAFETY DATA SHEET
Page 3 of 7
SECTION VIII - Exposure Controls/Personal Protection

Hazardous
Component		ACGIH
TLV(TWA)
PPM		OSHA
PEL
PPM
NonHazardous
Component		ACGIH
TLV(TWA)
PPM		OSHA
PEL
PPM
Solvent refined heavy paraffinic oil
Solvent refined resiual oil (petroleum)
Hydrotreated heavy napthenic oil
Polyisobutylene polymer
Industrial gear oil additive
Colloidal MoS2 (molybdenum disulfide)		Not established
Not established
Not established
Not established
Not established
Not established		Not established
Not established
Not established
Not established
Not established
Not established

PERSONAL PROTECTIVE EQUIPMENT: Protective clothing should be selected specifically for the working place, depending on concentration and quantity of the substances being handled. The resistance of the protective clothing should be ascertained from the respective supplier.

RESPIRATORY PROTECTION: Required when vapors are generated.

EYE PROTECTION: Splash goggles.

HAND PROTECTION: Chemical resistant gloves and skin cream.

INDUSTRIAL HYGIENE: Immediately change any contaminated clothing. Apply skin protective barrier cream. Wash hands and face after handling product. Do not inhale vapors.
SECTION IX - Physical and Chemical Properties

Physical State: Dark amber liquid
Odor: lube oil odor
pH: N/A
Viscosity:
Lowest Flashpoint: 350 ° F COC (176 C)
Explosion Level: Lower - N/A Upper - N/A
Vapor Pressure: <1 @ 20 C
Vapor Density: (Air = 1) >1
Weight Per Gallon: 7.3 lbs./gal.
Solubility: Insoluble in water


12-700127-000

Heavy Duty Oil (90/140)
MATERIAL SAFETY DATA SHEET
Page 4 of 7
SECTION X - Stability and Reactivity

Conditions to be avoided: Exposure to excessive heat, open flames and sperks. Conditions that favor the formation of excessive mists and fumes.
Substances to be avoided: Strong oxidizers
Hazardous decomposition products: Oxides of carbon, sulfur, nitrogen, phosphorous and hydrogen sulfide from burning.
Further information:
SECTION XI - Toxicological Information

Acute Toxicity:


Specific symptoms in animal studies:
Subacute to chronic toxicity:
Bacterial mutagenicity:
Further toxicological information:

Further Data:



12-700127-000

Heavy Duty Oil (90/140)
MATERIAL SAFETY DATA SHEET
Page 5 of 7
SECTION XII - Ecological Information

Biologic degradation:

Ecotoxic effects:
Biological effects:
Fish toxicity:
Daphnia toxicity:
Maximum permissible toxic concentration:
Algeal toxicity:
Bacterial toxicity:
Protozoa:
Further ecological data:
SECTION XIII - Disposal Considerations

Product: Chemicals must be disposed of in accordance with national and local regulations.

Packaging: Packaging must be disposed of in compliance with national and local regulations.


12-700127-000

Heavy Duty Oil (90/140)
MATERIAL SAFETY DATA SHEET
Page 6 of 7
SECTION XIV - Transportation Information

Package Desc:
Weight:
Dimensions:
Freeze/Thaw stable:
Flashpoint: 350 ° F COC (176 C)

Land transport:
Classification: Not Regulated
Name:

Transport by sea:
Classification: Not Regulated
EMS
MFAG
Name

Transport by air:
Classification: Not Regulated
Name:
Packaging Instructions:

The transport regulations are cited according to international regulations and in the form applicable in the United States. Possible deviations in other counties are not considered.
THIS TRANSPORT DATA APPLIES TO THE ENTIRE PACKAGE.
SECTION XV - Regulatory Information

Labeling according to Land Transport:
Hazard:
Package:
Other: Orientation Arrows

Labeling according to Sea Transport:
Hazard:
Package:
Other: Orientation Arrows

Labeling according to Air Transport
Hazard:
Package:
Other: Orientation Arrows


12-700127-000

Heavy Duty Oil (90/140)
MATERIAL SAFETY DATA SHEET
Page 7 of 7
SECTION XVI - Other Information

OSHA Hazard Class Eye/skin irritant
SARA Hazard Class Chronic Health Effects
Sara Title III Section 313 Toxic Chemicals None known to be present at 1% (0.1% for carcinogens) or more.

The information contained herein is information received from our raw material suppliers and other sources and is believed to be reliable. This data is not to be taken as warranty or representation for which Brunswick assumes legal responsibility.

This Safety Data Sheet complies with EC Commission Directive 2001/58/EC of July 2001