MATERIAL SAFETY DATA SHEET

Discontinued:

Date of Preparation: 01/24/2007

Page 1of 7

SECTION I - Product and Company Description

Product Name: DBA Pro-Ject Resin Component A
Product Use: Epoxy Resin
Product Number: 111421

Company: DBA Products Company Inc.
525 W. Laketon
Muskegon, Michigan 49441

Telephone #: 1/231/725-4972
Emergency #: 1/800/255-3924

CHEMTEL #: 1/800/255-3924
International CHEMTEL #: 1/813/248-0585

SECTION II - Composition/Information on Ingredients

HAZARDOUS INGREDIENT MATERIAL DESCRIPTION REF#	CAS#	ECN#		SARA 313 Y/N % Wt.
Alkyl Phenol	84852-15-3	84852-15-3		Y 7.0

NONHAZARDOUS INGREDIENT MATERIAL DESCRIPTION REF#	CAS#	ECN#		SARA 313 Y/N % Wt.
Bispneol Epoxy Resin Alkyl Glycidyl Ether Silicon Dioxide Titanium Dioxide	25068-38-6 2210-79-9 112945-52-5 13463-67-7	25068-38-6 2210-79-9 112945-52-5 13463-67-7		N 80.0 N 5.0 N 7.0 N 1.0

This product contains a chemical reported to be a carcinogen or suspected carcinogen.

SECTION III - Hazards Identification

Emergency Overview: DANGER! HARMFUL IF INHALED OR SWALLOWED. MAY CAUSE RESPIRATORY TRACT, EYE AND SKIN IRRITATION. Use only with adequate ventilation. Routes of Entry: Skin contact. Eye contact. Inhalation. Ingestion. Potential Acute Health Effects: Eyes: This product is an eye irritant. Skin: Irritating to skin. Permeator (absorbed through the skin). Inhalation: May cause lung irritation. Ingestion: Harmful if swallowed. Potential Chronic Health Effects: Carcinogenic Effects: None. Mutagenic Effects: Non-mutagenic Teratogenic: Classified PROVEN for human (Toluene) Repeated or Prolonged exposure to the substance can produce target organ damage. Repeated or prolonged inhalation of vapors may lead to chronic respiratory irritation. Target Organs: None known. Medical Conditions Aggravated By Overexposure: No additional information. Overexposure Signs and Symptoms: Skin inflammation is characterized by itching, scaling, reddening. Redness, watering, and itching characterize inflammation of the eye. Product EC Risk Phrases: R:22, 36/37/38, 43 Product EC Safety: S: 15, 24/25, 27/28, 37/39 Product EC Labels Required: XI This product contains items which alone require labeling and risk phrases shown above. The actual product labels and risk phrases may vary. They are warnings particular to the raw materials incorporated into this product. They are listed to inform the user that components in this product may cause these hazardous actions to occur in particular situations.

111421
DBA Pro-Ject Resin Component A

MATERIAL SAFETY DATA SHEET

Page 2 of 7

SECTION IV - First Aid Measures

EYE CONTACT: Flush with lukewarm water for 15 minutes. Contact physician.
SKIN CONTACT: Do not remove with solvent. Use waterless hand cleaner followed by soap and water. Remove and clean contaminated clothing.
INHALATION: Remove exposed individual to fresh air. Restore breathing, if necessary. Get medical attention.
INGESTION: Rinse mouth. Call a physician or Poison Control Center immediately. DO induce vomiting unless advised by a physician.

SECTION V - Fire-Fighting Measures

EXTINGUISHING MEDIA: Use CO2, Dry Chemical or Foam
SPECIAL RISKS: Vapors heavier than air. Development of hazardous combustion gases or vapors possible in the event of fire.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE FIGHTING: Fire Fighters should use self-contained breathing apparatus with face piece.
OTHER INFORMATION: Keep away from sources of ignition. Prevent fire-fighting water from entering surface water or groundwater. Cool Container with spray water from a safe distance. Never use welding or cutting torch on or near container (even empty) because product may ignite explosively.

SECTION VI - Accidental Release Measures

PERSON RELATED PRECAUTIONARY MEASURES: Avoid substance contact. Do not inhale vapors. Ensure fresh air supply in enclosed areas.
ENVIRONMENTAL PROTECTION MEASSURES: Do not allow to enter sewage system, surface or groundwater.
PROCEDURES FOR CLEANING/ABSOPRTION: Use inert absorbent material to take up spilled material. Place in appropriate container until proper disposal method is determined.

SECTION VII - Handling And Storage

NOTES FOR PREVENTION OF FIRE AND EXPLOSION: Keep away from sources of ignition. Use and store this product with adequate ventilation.
NOTES FOR SAFE HANDLING: Avoid generation of vapors. Do not inhale vapors.
STORAGE: Store in well-ventilated area between 40 F (4C) and 100 F (38C). Store away from heat and sources of ignition.

Brunswick takes no responsibility for determining what measures are required for personal protection in any specific application. The general information given should be used with discretion.

111421
DBA Pro-Ject Resin Component A

MATERIAL SAFETY DATA SHEET

Page 3 of 7

SECTION VIII - Exposure Controls/Personal Protection

Hazardous Component		ACGIH TLV(TWA) PPM	OSHA PEL PPM
Alkyl Phenol		Not established	Not established

NonHazardous Component		ACGIH TLV(TWA) PPM	OSHA PEL PPM
Bispneol Epoxy Resin Alkyl Glycidyl Ether Silicon Dioxide Titanium Dioxide		Not established Not established Not established Not established	Not established Not established Not established Not established

PERSONAL PROTECTIVE EQUIPMENT: Protective clothing should be selected specifically for the working place, depending on concentration and quantity of the substances being handled. The resistance of the protective clothing should be ascertained from the respective supplier.

RESPIRATORY PROTECTION: Required when vapors are generated.

EYE PROTECTION: Splash goggles.

HAND PROTECTION: Chemical resistant gloves and skin cream.

INDUSTRIAL HYGIENE: Immediately change any contaminated clothing. Apply skin protective barrier cream. Wash hands and face after handling product. Do not inhale vapors.

SECTION IX - Physical and Chemical Properties

Physical State: White Creamy Oily Liquid
Odor: Oil Epoxy Smell
pH: N/A
Viscosity:
Lowest Flashpoint: >200 ° F (93.3 C).
Explosion Level: Lower - Unknown Upper - Unknown
Vapor Pressure: <1 mm Hg
Vapor Density: (Air = 1) N/A
Weight Per Gallon: lbs./gal.
Solubility: Negligible

111421
DBA Pro-Ject Resin Component A

MATERIAL SAFETY DATA SHEET

Page 4 of 7

SECTION X - Stability and Reactivity

Conditions to be avoided: High heat, amines, strong oxidizers, acids and bases.
Substances to be avoided: N/A
Hazardous decomposition products: Fumes, carbon dioxide, carbon monoxide, acrid smoke, phenolics and aldehydes
Further information: Product is stable. Hazardous Polymerization will auto-polymerize at very high temperatures

SECTION XI - Toxicological Information

Acute Toxicity:
Product had minimal acute oral toxicity. Chronic effects could include skin sensitization and lung irritation. Material should be pumped from stomach by physician if swallowed. No known carcinogenicity.

Specific symptoms in animal studies: N/A
Subacute to chronic toxicity: N/A
Bacterial mutagenicity: N/A
Further toxicological information: N/A

Further Data: N/A

111421
DBA Pro-Ject Resin Component A

MATERIAL SAFETY DATA SHEET

Page 5 of 7

SECTION XII - Ecological Information

Biologic degradation: Not determined. Quantities involved in standard packaging suggest negligible impact probable.

Ecotoxic effects: N/A
Biological effects: N/A
Fish toxicity: N/A
Daphnia toxicity: N/A
Maximum permissible toxic concentration: N/A
Algeal toxicity: N/A
Bacterial toxicity: N/A
Protozoa: N/A
Further ecological data: N/A

SECTION XIII - Disposal Considerations

Product: Chemicals must be disposed of in accordance with national and local regulations.

Packaging: Packaging must be disposed of in compliance with national and local regulations.

111421
DBA Pro-Ject Resin Component A

MATERIAL SAFETY DATA SHEET

Page 6 of 7

SECTION XIV - Transportation Information

Package Desc:
Weight:
Dimensions:
Freeze/Thaw stable:
Flashpoint: >200 ° F (93.3 C).

Land transport:
Classification: Not Regulated
Name:

Transport by sea:
Classification: Not Regulated
EMS
MFAG
Name

Transport by air:
Classification: Not Regulated
Name:
Packaging Instructions:

The transport regulations are cited according to international regulations and in the form applicable in the United States. Possible deviations in other counties are not considered.
THIS TRANSPORT DATA APPLIES TO THE ENTIRE PACKAGE.

SECTION XV - Regulatory Information

Labeling according to Land Transport:
Hazard:
Package:
Other: Orientation Arrows

Labeling according to Sea Transport:
Hazard:
Package:
Other: Orientation Arrows

Labeling according to Air Transport
Hazard:
Package:
Other: Orientation Arrows

111421
DBA Pro-Ject Resin Component A

MATERIAL SAFETY DATA SHEET

Page 7 of 7

SECTION XVI - Other Information

HMIS Ratings: Health: 1 Flammability: 1 Reactivity: 0
NFPA Ratings: Health: 1 Flammability: 1 Reactivity: 0

Regulatory Data:

SARA Hazard Categories (311/312): Immediate (Acute) Health Hazard. Delayed (Chronic) Health Hazard.

Toxic Substances Control Act (TSCA) Inventory Status: Some or all of this product's components are listed by TSCA Inventory of Chemical Substances.

California Safe Drinking Water and Toxic Enforcement Act (Proposition 65)
Epichlorohydrin (106-89-8) <2 ppm (m) CA_65 C/R
Phenyl glycidyl ether (122-60-1) <6 ppm (m) CA_65 C

Other Information

Explanation of Labeling Requirements:

EC RISK PHRASES:
R: 36/38, 43
R: 22, 36/37
R: 34, 50, 53

R22: Harmful if swallowed.
R34: Causes burns.
R36/37/38: Irritating to eyes, respiratory system and skin
R43: May cause sensitization by skin contact.
R50: Very toxic to aquatic organisms
R53: May cause long-term adverse effects in a aquatic environment.

The information contained herein is information received from our raw material suppliers and other sources and is believed to be reliable. This data is not to be taken as warranty or representation for which Brunswick assumes legal responsibility.

This Safety Data Sheet complies with EC Commission Directive 2001/58/EC of July 2001