MATERIAL SAFETY DATA SHEET
Discontinued:
Date of Preparation: 06/25/2009
Page 1of 7
SECTION I - Product and Company Description

Product Name: 321 White
Product Use: Epoxy Pigment
Product Number: 160321WHT

Company: Brunswick
525 W. Laketon
Muskegon, MI 49443

Telephone #: 1/231/725-4972
Emergency #: 1/800/255-3924
CHEMTEL #: 1/800/255-3924
International CHEMTEL #:

SECTION II - Composition/Information on Ingredients
HAZARDOUS
INGREDIENT
MATERIAL DESCRIPTION
REF#		CAS#ECN#SARA
313
Y/N
% Wt.
NONHAZARDOUS
INGREDIENT
MATERIAL DESCRIPTION
REF#		CAS#ECN#SARA
313
Y/N
% Wt.
Bisphenol A - Epichlorohydrin polymer
Alkyl Glycidyl Ether
Triphenyl Phosphite
White Pigment		25068-38-6
68609-97-2
120547-52-6
Proprietary		25068-38-6
68609-97-2
120547-52-6
Proprietary		N 84.0
N 8.1
N 1.8
N 6.1

This product contains no reported carcinogens or suspected carcinogens.
SECTION III - Hazards Identification


160321WHT
321 White
MATERIAL SAFETY DATA SHEET
Page 2 of 7
SECTION IV - First Aid Measures

EYE CONTACT: Flush with lukewarm water for 15 minutes. Contact physician.
SKIN CONTACT: Do not remove with solvent. Use waterless hand cleaner followed by soap and water. Remove and clean contaminated clothing.
INHALATION: Remove exposed individual to fresh air. Restore breathing, if necessary. Get medical attention.
INGESTION: Rinse mouth. Call a physician or Poison Control Center immediately. DO NOT induce vomiting unless advised by a physician.
SECTION V - Fire-Fighting Measures

EXTINGUISHING MEDIA: Use CO2, Dry Chemical or Foam
SPECIAL RISKS: Vapors heavier than air. Development of hazardous combustion gases or vapors possible in the event of fire.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE FIGHTING: Fire Fighters should use self-contained breathing apparatus with face piece.
OTHER INFORMATION: Keep away from sources of ignition. Prevent fire-fighting water from entering surface water or groundwater. Cool Container with spray water from a safe distance. Never use welding or cutting torch on or near container (even empty) because product may ignite explosively.
SECTION VI - Accidental Release Measures

PERSON RELATED PRECAUTIONARY MEASURES: Avoid substance contact. Do not inhale vapors. Ensure fresh air supply in enclosed areas.
ENVIRONMENTAL PROTECTION MEASSURES: Do not allow to enter sewage system, surface or groundwater.
PROCEDURES FOR CLEANING/ABSOPRTION: Use inert absorbent material to take up spilled material. Place in appropriate container until proper disposal method is determined.
SECTION VII - Handling And Storage

NOTES FOR PREVENTION OF FIRE AND EXPLOSION: Keep away from sources of ignition. Use and store this product with adequate ventilation.
NOTES FOR SAFE HANDLING: Avoid generation of vapors. Do not inhale vapors.
STORAGE: Store in well-ventilated area between 40 F (4C) and 100 F (38C). Store away from heat and sources of ignition.
Brunswick takes no responsibility for determining what measures are required for personal protection in any specific application. The general information given should be used with discretion.


160321WHT
321 White
MATERIAL SAFETY DATA SHEET
Page 3 of 7
SECTION VIII - Exposure Controls/Personal Protection

Hazardous
Component		ACGIH
TLV(TWA)
PPM		OSHA
PEL
PPM
NonHazardous
Component		ACGIH
TLV(TWA)
PPM		OSHA
PEL
PPM
Bisphenol A - Epichlorohydrin polymer
Alkyl Glycidyl Ether
Triphenyl Phosphite
White Pigment		Not established
Not established
Not established
Not established		Not established
Not established
Not established
Not established

PERSONAL PROTECTIVE EQUIPMENT: Protective clothing should be selected specifically for the working place, depending on concentration and quantity of the substances being handled. The resistance of the protective clothing should be ascertained from the respective supplier.

RESPIRATORY PROTECTION: Required when vapors are generated.

EYE PROTECTION: Splash goggles.

HAND PROTECTION: Chemical resistant gloves and skin cream.

INDUSTRIAL HYGIENE: Immediately change any contaminated clothing. Apply skin protective barrier cream. Wash hands and face after handling product. Do not inhale vapors.
SECTION IX - Physical and Chemical Properties

Physical State: liquid
Odor: slight phenolic
pH: Not determined
Viscosity:
Lowest Flashpoint: >300 F (149 C) ° F.
Explosion Level: Lower - Not determined Upper - Not determined
Vapor Pressure: Negligible
Vapor Density: (Air = 1) Not applicable
Weight Per Gallon: 9.16 lbs./gal.
Solubility: in water Negligible


160321WHT
321 White
MATERIAL SAFETY DATA SHEET
Page 4 of 7
SECTION X - Stability and Reactivity

Conditions to be avoided: Under normal conditions product is stable.
Substances to be avoided: Exposure to amines, strong acids or bases in bulk, strong oxidizers.
Hazardous decomposition products: CO, CO2, aldehydes
Further information: Hazardous polymerization will not occur by itself, but masses of more than one pound of product plus an aliphatic amine will cause irreversible polymerization with considerable heat.
SECTION XI - Toxicological Information

Acute Toxicity:
No Information

Specific symptoms in animal studies: No Information
Subacute to chronic toxicity: No Information
Bacterial mutagenicity: No Information
Further toxicological information: No Information

Further Data: No Information



160321WHT
321 White
MATERIAL SAFETY DATA SHEET
Page 5 of 7
SECTION XII - Ecological Information

Biologic degradation: No Information

Ecotoxic effects: No Information
Biological effects: No Information
Fish toxicity: No Information
Daphnia toxicity: No Information
Maximum permissible toxic concentration: No Information
Algeal toxicity: No Information
Bacterial toxicity: No Information
Protozoa: No Information
Further ecological data: No Information
SECTION XIII - Disposal Considerations

Product: Chemicals must be disposed of in accordance with national and local regulations.

Packaging: Packaging must be disposed of in compliance with national and local regulations.


160321WHT
321 White
MATERIAL SAFETY DATA SHEET
Page 6 of 7
SECTION XIV - Transportation Information

Package Desc:
Weight:
Dimensions:
Freeze/Thaw stable:
Flashpoint: >300 F (149 C) ° F.

Land transport:
Classification: Not Regulated
Name:

Transport by sea:
Classification: Not Regulated
EMS
MFAG
Name

Transport by air:
Classification: Not Regulated
Name:
Packaging Instructions:

The transport regulations are cited according to international regulations and in the form applicable in the United States. Possible deviations in other counties are not considered.
THIS TRANSPORT DATA APPLIES TO THE ENTIRE PACKAGE.
SECTION XV - Regulatory Information

Labeling according to Land Transport:
Hazard:
Package:
Other: Orientation Arrows

Labeling according to Sea Transport:
Hazard:
Package:
Other: Orientation Arrows

Labeling according to Air Transport
Hazard:
Package:
Other: Orientation Arrows


160321WHT
321 White
MATERIAL SAFETY DATA SHEET
Page 7 of 7
SECTION XVI - Other Information

Routes of Entry and Effects of Acute Exposure:
INHALATION - Irritation unlikely
EYE - May cause pain. Slight transient irritation with slight trasient corneal injury.
SKIN - No irritation expected with proper usage. If irritatio9n or sesitization develops discontinue use and consult a physician.
INGESTION - If large amounts are swallowed, induce vomiting by giving two glasses of water and sticking finger down thaoat. Never give anything by mouth to an unconscious person.

The information contained herein is information received from our raw material suppliers and other sources and is believed to be reliable. This data is not to be taken as warranty or representation for which Brunswick assumes legal responsibility.

This Safety Data Sheet complies with EC Commission Directive 2001/58/EC of July 2001