MATERIAL SAFETY DATA SHEET
Discontinued:
Date of Preparation: 06/07/2007
Page 1of 7
SECTION I - Product and Company Description

Product Name: Curethane CU 100 Topcoat Resin
Product Use: Resin Compound
Product Number: 62-860005-100A

Company: DBA Products Company Inc.
525 W. Laketon
Muskegon, MI 49443

Telephone #: 1/231/725-4972
Emergency #: 1/800/255-3924
CHEMTEL #: 1/800/255-3924
International CHEMTEL #: 1/813/248-0585

SECTION II - Composition/Information on Ingredients
HAZARDOUS
INGREDIENT
MATERIAL DESCRIPTION
REF#		CAS#ECN#SARA
313
Y/N
% Wt.
Aryl Mercurial Catalyst7439-97-6N .1
NONHAZARDOUS
INGREDIENT
MATERIAL DESCRIPTION
REF#		CAS#ECN#SARA
313
Y/N
% Wt.
Castor Oil
Wax
Silicone		Proprietary
Proprietary
Proprietary		N 84.9
N 13.8
N 1.2

This product contains no reported carcinogens or suspected carcinogens.
SECTION III - Hazards Identification

Emergency Overview: Straw liquid with mild odor - - - Class IIIB - Combustible Liquid Potential Health Effects - Eye: Overexposure to isocyanate products can cause eye irritation. Potential Health Effects - Skin: Overexposure to isocyanate products can cause skin irritation. It can also lead to skin sensitization. The reaction may include rash, itching, hives and swelling of the arms and legs. Potential Health Effects - Inhalation: Overexposure to isocyanate products can cause nose, throat, and lung irritation. It can also lead to lung sensitization. Symptoms may include coughing, wheezing, tightness in the chest and shortness of breath. Sensitization may develop as a result of a large single overexposure or from repeated overexposure at lower levels. Respiratory (lung) sensitization can result in strong asthmatic response to future airborne exposures, even at levels well below the TLV. Potential Health Effects - Ingestion: No ingestion exposure expected with normal occupational use. Potential Health Effects - Chronic Hazards: No information. The components listed in Section 2 may affect the following target organs: Eyes. Respiratory System. Primary Route(s) Of Entry: Skin Contact, Eye Contact
62-860005-100A
Curethane CU 100 Topcoat Resin
MATERIAL SAFETY DATA SHEET
Page 2 of 7
SECTION IV - First Aid Measures

EYE CONTACT: Flush with lukewarm water for 15 minutes. Contact physician.
SKIN CONTACT: Do not remove with solvent. Use waterless hand cleaner followed by soap and water. Remove and clean contaminated clothing.
INHALATION: Remove exposed individual to fresh air. Restore breathing, if necessary. Get medical attention.
INGESTION: Rinse mouth. Call a physician or Poison Control Center immediately. DO NOT induce vomiting unless advised by a physician.
SECTION V - Fire-Fighting Measures

EXTINGUISHING MEDIA: Use CO2, Dry Chemical or Foam
SPECIAL RISKS: Vapors heavier than air. Development of hazardous combustion gases or vapors possible in the event of fire.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE FIGHTING: Fire Fighters should use self-contained breathing apparatus with face piece.
OTHER INFORMATION: Keep away from sources of ignition. Prevent fire-fighting water from entering surface water or groundwater. Cool Container with spray water from a safe distance. Never use welding or cutting torch on or near container (even empty) because product may ignite explosively.
SECTION VI - Accidental Release Measures

PERSON RELATED PRECAUTIONARY MEASURES: Avoid substance contact. Do not inhale vapors. Ensure fresh air supply in enclosed areas.
ENVIRONMENTAL PROTECTION MEASSURES: Do not allow to enter sewage system, surface or groundwater.
PROCEDURES FOR CLEANING/ABSOPRTION: Use inert absorbent material to take up spilled material. Place in appropriate container until proper disposal method is determined.
SECTION VII - Handling And Storage

NOTES FOR PREVENTION OF FIRE AND EXPLOSION: Keep away from sources of ignition. Use and store this product with adequate ventilation.
NOTES FOR SAFE HANDLING: Avoid generation of vapors. Do not inhale vapors.
STORAGE: Store in well-ventilated area between 40 F (4C) and 100 F (38C). Store away from heat and sources of ignition.
Brunswick takes no responsibility for determining what measures are required for personal protection in any specific application. The general information given should be used with discretion.


62-860005-100A
Curethane CU 100 Topcoat Resin
MATERIAL SAFETY DATA SHEET
Page 3 of 7
SECTION VIII - Exposure Controls/Personal Protection

Hazardous
Component		ACGIH
TLV(TWA)
PPM		OSHA
PEL
PPM
Aryl Mercurial CatalystNot establishedNot established
NonHazardous
Component		ACGIH
TLV(TWA)
PPM		OSHA
PEL
PPM
Castor Oil
Wax
Silicone		Not established
Not established
Not established		Not established
Not established
Not established

PERSONAL PROTECTIVE EQUIPMENT: Protective clothing should be selected specifically for the working place, depending on concentration and quantity of the substances being handled. The resistance of the protective clothing should be ascertained from the respective supplier.

RESPIRATORY PROTECTION: Required when vapors are generated.

EYE PROTECTION: Splash goggles.

HAND PROTECTION: Chemical resistant gloves and skin cream.

INDUSTRIAL HYGIENE: Immediately change any contaminated clothing. Apply skin protective barrier cream. Wash hands and face after handling product. Do not inhale vapors.
SECTION IX - Physical and Chemical Properties

Physical State: Liquid
Odor: Castor Oil
pH: NA
Viscosity:
Lowest Flashpoint: >200 ° F(93.3 C).
Explosion Level: Lower - N.D. Upper - N.D.
Vapor Pressure: NA
Vapor Density: (Air = 1) >1
Weight Per Gallon: 8.4 lbs./gal.
Solubility: NA


62-860005-100A
Curethane CU 100 Topcoat Resin
MATERIAL SAFETY DATA SHEET
Page 4 of 7
SECTION X - Stability and Reactivity

Conditions to be avoided: Avoid contact with heat, open flame, sparks, or ignition sources. If moisture enters the container, carbon dioxide gas may form and cause the container lid to bulge or pop off.
Substances to be avoided:
Hazardous decomposition products: Hazardous Polymerization: May occur
Further information: Unstable
SECTION XI - Toxicological Information

Acute Toxicity:


Specific symptoms in animal studies:
Subacute to chronic toxicity:
Bacterial mutagenicity:
Further toxicological information:

Further Data: Chemical Name: Methylene Bis Phenylisocyanate LD50: Oral rat: 9200 mg/kg LC50: InhalationRat: 178 mg/m3
Chemical Name: Diphenylmethane Diisocyanate (Homopolymer) LD50: N.D. LC50: N.D.
Chemical Name: 2-Diphenylmethane Diisocyante LD50: N.D. LC50: N.D.



62-860005-100A
Curethane CU 100 Topcoat Resin
MATERIAL SAFETY DATA SHEET
Page 5 of 7
SECTION XII - Ecological Information

Biologic degradation:

Ecotoxic effects:
Biological effects:
Fish toxicity:
Daphnia toxicity:
Maximum permissible toxic concentration:
Algeal toxicity:
Bacterial toxicity:
Protozoa:
Further ecological data: Have not conducted specific studies on the eco toxicity or environmental fate of this product. Commonly available data on certain ingredients indicate that acute or chronic effects could result from uncontrolled releases to soil, groud water, storm waters, or air. Appropriate measures should be taken to prevent uncontrolled releases. Prompt containment and clean up should be performed if releases do occur.
SECTION XIII - Disposal Considerations

Product: Chemicals must be disposed of in accordance with national and local regulations.

Packaging: Packaging must be disposed of in compliance with national and local regulations.


62-860005-100A
Curethane CU 100 Topcoat Resin
MATERIAL SAFETY DATA SHEET
Page 6 of 7
SECTION XIV - Transportation Information

Package Desc:
Weight:
Dimensions:
Freeze/Thaw stable:
Flashpoint: >200 ° F(93.3 C).

Land transport:
Classification: Not Regulated
Name:

Transport by sea:
Classification: Not Regulated
EMS
MFAG
Name

Transport by air:
Classification: Not Regulated
Name:
Packaging Instructions:

The transport regulations are cited according to international regulations and in the form applicable in the United States. Possible deviations in other counties are not considered.
THIS TRANSPORT DATA APPLIES TO THE ENTIRE PACKAGE.
SECTION XV - Regulatory Information

Labeling according to Land Transport:
Hazard:
Package:
Other: Orientation Arrows

Labeling according to Sea Transport:
Hazard:
Package:
Other: Orientation Arrows

Labeling according to Air Transport
Hazard:
Package:
Other: Orientation Arrows


62-860005-100A
Curethane CU 100 Topcoat Resin
MATERIAL SAFETY DATA SHEET
Page 7 of 7
SECTION XVI - Other Information

HMIS Ratings: Health: 3 Flammability: 1 Reactivity: 1

The information contained herein is information received from our raw material suppliers and other sources and is believed to be reliable. This data is not to be taken as warranty or representation for which Brunswick assumes legal responsibility.

This Safety Data Sheet complies with EC Commission Directive 2001/58/EC of July 2001