MATERIAL SAFETY DATA SHEET
Discontinued:
Date of Preparation: 12/20/2006
Page 1of 7
SECTION I - Product and Company Description

Product Name: DBA Lane Wick Adhesive Resin
Product Use: Epoxy Resin
Product Number: 1121008

Company: DBA Products Company Inc.
525 W. Laketon
Muskegon, MI 49443

Telephone #: 1/231/725-4972
Emergency #: 1/800/255-3924
CHEMTEL #: 1/800/255-3924
International CHEMTEL #: 1/813/248-0585

SECTION II - Composition/Information on Ingredients
HAZARDOUS
INGREDIENT
MATERIAL DESCRIPTION
REF#		CAS#ECN#SARA
313
Y/N
% Wt.
NONHAZARDOUS
INGREDIENT
MATERIAL DESCRIPTION
REF#		CAS#ECN#SARA
313
Y/N
% Wt.
Epoxy Resin MixtureNone EstablishedN 100.0

This product contains no reported carcinogens or suspected carcinogens.
SECTION III - Hazards Identification

HMIS Codes: Health: 2 Flammability: 1 Reactivity: 0 The health effects noted below are consistent with requirements under the OSHA Hazard Communication Standard (29 CFR 1910.1200). Skin Contact: Based on similar product testing product is moderately irritating to the skin. Based on similar product testing product may cause skin sensitization. Contact with product at elevated temperatures can result in thermal burns. Eyes: Based on similar product testing product is moderately irritating to the eyes. Contact with product at elevated temperatures can result in thermal burns. Inhalation: Because of its low volatility this product is not likely to be an inhalation hazard. Ingestion: Based on product testing product is considered to have a low order of acute oral toxicity. Signs and Symptoms: Irritation as noted above. Skin sensitizer (allergy) may be evidence by rashes, especially hives. Aggravated Medical Conditions: Preexisting eye, skin, and respiratory disorders may be aggravated by exposure to this product. Preexisting lung or skin allergies may increase the chance of developing increased allergy symptoms from exposure to this product. Supplemental Health Information: Chronic Studies: Recent 2-year Bio-assays in mice exposed by the dermal route to the Diglycidyl Ether of Bisphenol-A Resin (DGEBPA), or two other commercial resins which are composed predominately of Diglycidyl Ether of Bisphenol-A have yielded very little evidence of weak carcinogenicity. DGEBPA is a component of this resin. The authors of this work concluded that the renal tumor evidence with this resin "was of no biological significance" and that the resin "is not a systematic carcinogen when applied to dorsal skin of CF1 mice." Based upon this and all other available information. The internal agency for research on cancer (IARC) concluded (1988) that DGEBPA (a component of this product) have proved to be interactive when tested by vivo mutagenicity assays. It has shown activity by in vitro microbial mutagenicity screening and have both produced chromosomal aberrations in cultured rat liver cells. The significance of this information to man is unknown.
1121008
DBA Lane Wick Adhesive Resin
MATERIAL SAFETY DATA SHEET
Page 2 of 7
SECTION IV - First Aid Measures

EYE CONTACT: Flush with lukewarm water for 15 minutes. Contact physician.
SKIN CONTACT: Do not remove with solvent. Use waterless hand cleaner followed by soap and water. Remove and clean contaminated clothing.
INHALATION: Remove exposed individual to fresh air. Restore breathing, if necessary. Get medical attention.
INGESTION: Rinse mouth. Call a physician or Poison Control Center immediately. DO NOT induce vomiting unless advised by a physician.
SECTION V - Fire-Fighting Measures

EXTINGUISHING MEDIA: Use CO2, Dry Chemical or Foam
SPECIAL RISKS: Vapors heavier than air. Development of hazardous combustion gases or vapors possible in the event of fire.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE FIGHTING: Fire Fighters should use self-contained breathing apparatus with face piece.
OTHER INFORMATION: Keep away from sources of ignition. Prevent fire-fighting water from entering surface water or groundwater. Cool Container with spray water from a safe distance. Never use welding or cutting torch on or near container (even empty) because product may ignite explosively.
SECTION VI - Accidental Release Measures

PERSON RELATED PRECAUTIONARY MEASURES: Avoid substance contact. Do not inhale vapors. Ensure fresh air supply in enclosed areas.
ENVIRONMENTAL PROTECTION MEASSURES: Do not allow to enter sewage system, surface or groundwater.
PROCEDURES FOR CLEANING/ABSOPRTION: Use inert absorbent material to take up spilled material. Place in appropriate container until proper disposal method is determined.
SECTION VII - Handling And Storage

NOTES FOR PREVENTION OF FIRE AND EXPLOSION: Keep away from sources of ignition. Use and store this product with adequate ventilation.
NOTES FOR SAFE HANDLING: Avoid generation of vapors. Do not inhale vapors.
STORAGE: Store in well-ventilated area between 40 F (4C) and 100 F (38C). Store away from heat and sources of ignition.
Brunswick takes no responsibility for determining what measures are required for personal protection in any specific application. The general information given should be used with discretion.


1121008
DBA Lane Wick Adhesive Resin
MATERIAL SAFETY DATA SHEET
Page 3 of 7
SECTION VIII - Exposure Controls/Personal Protection

Hazardous
Component		ACGIH
TLV(TWA)
PPM		OSHA
PEL
PPM
NonHazardous
Component		ACGIH
TLV(TWA)
PPM		OSHA
PEL
PPM
Epoxy Resin MixtureNot establishedNot established

PERSONAL PROTECTIVE EQUIPMENT: Protective clothing should be selected specifically for the working place, depending on concentration and quantity of the substances being handled. The resistance of the protective clothing should be ascertained from the respective supplier.

RESPIRATORY PROTECTION: Required when vapors are generated.

EYE PROTECTION: Splash goggles.

HAND PROTECTION: Chemical resistant gloves and skin cream.

INDUSTRIAL HYGIENE: Immediately change any contaminated clothing. Apply skin protective barrier cream. Wash hands and face after handling product. Do not inhale vapors.
SECTION IX - Physical and Chemical Properties

Physical State: Liquid form
Odor: Mild
pH:
Viscosity:
Lowest Flashpoint: 480 ° F (248.9 C) (PMCC).
Explosion Level: Lower - Upper -
Vapor Pressure: .03 (MM HG)
Vapor Density: (Air = 1)
Weight Per Gallon: 9.1 lbs./gal.
Solubility: Negligible


1121008
DBA Lane Wick Adhesive Resin
MATERIAL SAFETY DATA SHEET
Page 4 of 7
SECTION X - Stability and Reactivity

Conditions to be avoided: Can react vigorously with strong oxidation agents, strong lewis or mineral acids, and strong mineral, organic bases/especially primary and secondary aliphatic amines. Reactions with some curing agents may produce considerable heat. Runaway chain reactions may char and decompose the resin system, generating unidentified fumes and vapors that may be toxic.
Substances to be avoided:
Hazardous decomposition products: Carbon monoxide, aldehydes, acids, and other organic substances may be formed during combustion or elevated (>500 Deg. F.) temperature degradation.
Further information: Hazardous Polymerization may occur with catalyst or hardeners in uncontrolled conditions.
SECTION XI - Toxicological Information

Acute Toxicity:


Specific symptoms in animal studies:
Subacute to chronic toxicity:
Bacterial mutagenicity:
Further toxicological information:

Further Data:



1121008
DBA Lane Wick Adhesive Resin
MATERIAL SAFETY DATA SHEET
Page 5 of 7
SECTION XII - Ecological Information

Biologic degradation: NA

Ecotoxic effects: NA
Biological effects: NA
Fish toxicity: NA
Daphnia toxicity: NA
Maximum permissible toxic concentration: NA
Algeal toxicity: NA
Bacterial toxicity: NA
Protozoa: NA
Further ecological data: NA
SECTION XIII - Disposal Considerations

Product: Chemicals must be disposed of in accordance with national and local regulations.

Packaging: Packaging must be disposed of in compliance with national and local regulations.


1121008
DBA Lane Wick Adhesive Resin
MATERIAL SAFETY DATA SHEET
Page 6 of 7
SECTION XIV - Transportation Information

Package Desc:
Weight:
Dimensions:
Freeze/Thaw stable:
Flashpoint: 480 ° F (248.9 C) (PMCC).

Land transport:
Classification: Not Regulated
Name:

Transport by sea:
Classification: Not Regulated
EMS
MFAG
Name

Transport by air:
Classification: Not Regulated
Name:
Packaging Instructions:

The transport regulations are cited according to international regulations and in the form applicable in the United States. Possible deviations in other counties are not considered.
THIS TRANSPORT DATA APPLIES TO THE ENTIRE PACKAGE.
SECTION XV - Regulatory Information

Labeling according to Land Transport:
Hazard:
Package:
Other: Orientation Arrows

Labeling according to Sea Transport:
Hazard:
Package:
Other: Orientation Arrows

Labeling according to Air Transport
Hazard:
Package:
Other: Orientation Arrows


1121008
DBA Lane Wick Adhesive Resin
MATERIAL SAFETY DATA SHEET
Page 7 of 7
SECTION XVI - Other Information

Acute Toxicity Data:
No. Acute Oral LD50 Acute Dermal LD50 Acute Inhalation LC50
P 11.4 G/KG (Rat) >20 ML/KG (Rabbit) No Deaths in Sat'd
P 15.6 G/KG (Mouse) Air, 8 hr. *

Special Precautions:
Precautions to be taken in Handling and Storage: Practice and observe good housekeeping procedures in personal hygiene and cleanliness. Avoid skin and eye contact, as well as, breathing of vapors or fumes especially when material is heated.

Environmental Release Information: Keep out of surface waters, sewers, and waterways entering or leading to surface waters. Notify authorities if any exposure to the general public or environmental occurs or is likely to occur. If this product becomes a waste by RCRA criteria (40 CFR 261). Place in an appropriate disposal facility in compliance with local regulations.

Other Regulatory Controls:
All ingredients of this compound are listed on the EPA/TSCA Inventory of Chemical Substances.

Protection of stratospheric ozone (pursuant 611 of the clean air act amendments of 1990); per 40 CFR part 82. The base resin does not contain nor was it directly manufactured with any class 1 or class 2 ozone depleting substances.

Spill Or Leak Procedures:
Steps to be taken in case Material is Released or Spilled: May burn although not readily ignitable. Use cautious judgment when cleaning up large spills.

For large spills wear respirator and protective clothing as appropriate. Shut off source of leak if safe to do so. Dike and contain. Remove with vacuum pumps or truck to storage/salvage vessels. Soak up residue with an absorbent such as clay, sand, or other suitable material; dispose of properly, flush area with water to remove trace residue.

For Small Spills take up with an absorbent material and dispose of properly.

Waste Disposal Method. Incinerate or bury in an approved chemical disposal facility in a manner which complies with all local, state, and federal regulations.

The information contained herein is information received from our raw material suppliers and other sources and is believed to be reliable. This data is not to be taken as warranty or representation for which Brunswick assumes legal responsibility.

This Safety Data Sheet complies with EC Commission Directive 2001/58/EC of July 2001